Chongqing Youye Auto Parts Co., LTD.: Automobile half axle (Under ）
Description：2) semi-floating semi-shaftThe inner end of the semi-floating semi-shaft is the same as that of the ....
2) semi-floating semi-shaft
The inner end of the semi-floating semi-shaft is the same as that of the full floating semi-shaft, and does not bear bending and torsion. The outer end is directly supported on the inner side of the half shaft housing by a bearing. This type of support will make the outer end of the half shaft bear the moment. Therefore, this kind of half sleeve in addition to transfer torque, but also locally bear bending moment, so called half floating half shaft. This type of construction is mainly used for small passenger cars.
The enclosed picture shows the drive axle of Hongqi CA7560 limousine. The inner end of the half shaft is not subjected to bending moment, and the outer end is to bear all bending moment, so it is called semi-floating support.
3) 3/4 floating half shaft
The degree of bending moment of 3/4 floating half shaft is between half floating and full floating. This type of half-axle application is not much, only in individual sleeper car application, such as Warsaw M20 car.
This article is compiled by Chongqing Youye Auto Parts Co., LTD
