Chongqing by page Auto Parts Co., LTD. : the replacement of the car ball cage cover tutorial
Description：The aging of the ball cage cover will directly replace the ball cage cover, generally only need to k....
The aging of the ball cage cover will directly replace the ball cage cover, generally only need to knock down the ball cage or remove the half shaft, bearing removal, new cover and fixed clip and other steps, the process is simple and cheap.
1. If you want to change the dust jacket, you have to remove the whole assembly and take out the outer ball cage. Of course, you can remove the ball cage section, afraid of removing it is difficult to install.
2, take out the ball cage section need to open the wheel, as well as the wheel swing arm, tie rod, shock absorber screw, brake calipers, etc..
3, the outer ball cage dust-proof cover is removed, which should be dedicated spring pliers to facilitate the removal of the outer ball cage three ball pins.
4, then remove the outer ball cage section card dust jacket clamp, remove the scrap dust jacket, remove the brake disc assembly pull out the cage section head into the dust jacket, install calipers, remember to add grease.
5. After loading into the outer ball cage section, install the clamp and then load the whole assembly into the car.
6. Install swing arm, tie rod, shock absorber screw, brake caliper, etc.
This article is compiled by Chongqing Youye Auto Parts Co., LTD
